.
.
Walfront 2 Pozisyon 5 Yollu Hava Kontrol Solenoid Valfı Pnömatik Geri Vites Anahtarı Kontrol Vanaları G1 / 4in Emme
₺ 1.00
Solenoid valf arızalandığında veya temizlendiğinde, sistemin çalışmaya devam etmesini sağlamak için bir baypas cihazı takılmalıdır.Bakır Bobin : Bakır bobin kullanılır, bobinin çapı yaklaşık olarak.08 in Çalışma Ortamı : Hava bağlantı noktası Boyutu : Emme, çıkış : G1/ 4in, egzoz : G1 / 8in Etkili kesit alanı : 16. Solenoid valfi takarken, valf gövdesindeki okun, valf gövdesinin akış yönü ile tutarlı olması gerektiğini unutmayın.
Ürün parametreleri
- Item Type:
- Solenoid Valve
- Product Material:
- Aluminum alloy + stainless steel + copper
- Product Model:
- 4V210-08 boutique model
- Coil Aperture:
- Approx. 2mm / 0.08in
- Working Medium:
- Air
- Port Size:
- Intake, Outlet
- Effective Cross Sectional Area:
- 16.0mm²
- Position Number:
- 5 Way 2 Position
- Pressure Range:
- 0.15-0.8MPa
- Working Temperature:
- -20-70℃
- Maximum Working Frequency:
- 5 times/sec
- Power Consumption:
- 4.5VA
- Waterproof Rating:
- IP65
- Application:
- food processing industry, robotics industry, chemical plant application industry, textile industry, automation workshop
- Package List:
- 1 x Solenoid Valve:
- Note:
- 1. When installing the solenoid valve, note that the arrow on the valve body should be consistent with the flow direction of the medium. Do not install in a place where there is direct dripping or splashing water. The solenoid valve should be installed vertically upwards.:
- 2. The solenoid valve should be guaranteed to work normally within the 15%‑10% fluctuation range of the power supply voltage of the rated voltage.:
- 3. After the solenoid valve is installed, there must be no reverse pressure difference in the pipeline. It needs to be energized several times to make it suitable for temperature before it can be put into use formally.:
- 4. The pipeline should be thoroughly cleaned before installation of the solenoid valve. The medium should be free of impurities. Install a filter before the valve.:
- 5. When the solenoid valve fails or is cleaned, a bypass device should be installed to ensure the system continues to run.:
Kategorideki ürünler
₺ 367.96
-5%
